MacDon FD75 OM - Manual (Page 195)

OPERATION
9. Insert pin (A) and turn pin to lock.
10. Lower header so that left wheels are just touching the
ground.
Figure 4.274: Locking Wheels
Moving Rear (Right) Wheels into Transport Position
To move the right (rear) transport wheels into transport
position, follow these steps:
1. Remove hairpin (A) from latch (B).
2. Lift latch (B), disengage right axle (C), and lower to
ground.
CAUTION
Stand clear of wheels and release linkage carefully as
wheels will drop once the mechanism is released.
3. Carefully pull handle (D) to release the spring and let
the wheel drop to the ground.
4. Lift wheel and linkage with handle (E) and position
linkage in second slot from bottom.
5. Lower handle (C) to lock.
Figure 4.275: Separating Axles
169894 181 Revision A