MacDon FD75 OM - Manual (Page 308)

MAINTENANCE AND SERVICING
9. Reinstall covers (C) and (D), engage inboard lip of
cover into auger tube and rotate cover back to engage
rear support.
10. Install cover retainer (F).
11. Replace and tighten bolts (A), (B) and (E).
Figure 6.77: Auger Drive
6.7.5 Auger Tines
The CA25 Combine Adapter auger uses retracting tines to feed the crop into the combine feeder house. Some
conditions may require the removal or addition of tines for optimal feeding of the crop. Tines that become worn or
damaged should be replaced.
Removing Feed Auger Tines
1. Raise reel, shutdown combine and remove key from
ignition.
2. Engage reel safety props.
3. Remove screws (A), and remove access cover (B).
Figure 6.78: Auger
169894 294 Revision A