MacDon FD75 OM - Manual (Page 368)

MAINTENANCE AND SERVICING
8. Reinstall drive cover (B) with screws (A).
Figure 6.203: Drive Cover
Replacing Chain on Double Reel Drive
The drive chain on a high torque double reel drive can be replaced using two methods. Refer to:
• Disconnecting the Reel Drive Method, page 354
• Breaking the Chain Method, page 357
Both procedures are acceptable, but disconnecting the reel drive method is preferred because the chain integrity is
not affected.
Disconnecting the Reel Drive Method
1. Lower header and reel, shut down combine, and
remove key from ignition.
2. Remove six screws (A) and then remove upper reel
drive cover (B).
Figure 6.204: Drive Cover
169894 354 Revision A