MacDon FD75 OM - Manual (Page 272)

MAINTENANCE AND SERVICING
6.3.1 Maintenance Schedule/Record
Copy this page to continue record.
Maintenance
Record
Action:  - Check  - Lubricate ▲ - Change
Hour Meter Reading
Date
Serviced By
FIRST USE, Refer to 6.3.2 Break-In Inspection, page 260
END OF SEASON, Refer to 6.3.4 End of Season Service, page 260
10 HOURS OR DAILY 8

Hydraulic Hoses and
Lines
9

Knife Sections, Guards,
and Hold-Downs
9
 Tire Pressure 9

Knife (except in sandy
conditions)
9
25 HOURS

Hydraulic Oil Level at
Reservoir
9
 Knifehead(s) 9
50 HOURS
 Draper Roller Bearings

Driveline and Driveline
Universals

Knife Drive Box Oil - First
50 Hours Only
100 HOURS OR ANNUALLY 8

Auger to Pan and Feed
Draper Clearance
 Draper Seal
 Gearbox Lubricant Level
 Reel Drive Chain Tension

Reel Tine/Cutterbar
Clearance
 Knife Drive Belt Tension
8. Whichever occurs first.
9. A record of daily maintenance is not normally required but is at the Owner’s/Operator’s discretion.
169894 258 Revision A