MacDon FD75 OM - Manual (Page 191)

OPERATION
7. Lift wheel assembly to desired height and slide
linkage (A) into appropriate slot in vertical support.
8. Push down on handle (B) to lock.
Figure 4.264: Positioning Wheels
Moving Rear (Right) Wheels into Field Position
To move the rear (right) transport wheels into field position, follow these steps.
1. Pull pin (A) on the left hand wheel behind the header.
Swivel wheel clockwise and lock with pin (A).
Figure 4.265: Swivelling Rear Wheel
2. Remove pin (A) and store at (B).
3. Pull handle (C) up to release.
4. Lift wheel to desired height and engage support
channel into slot (D) in vertical support.
5. Push down on handle (C) to lock.
Figure 4.266: Positioning Wheel
A - Pin B - Pin Storage Location
C - Handle D - Slot
169894 177 Revision A