MacDon FD75 OM - Manual (Page 382)

MAINTENANCE AND SERVICING
Installing Double Reel Drive Motor
1. Position hydraulic motor on motor mount (B) and align
holes in motor and motor mount.
2. Install four countersunk bolts (A) with thread locking
compound (Loctite
®
243), through holes and slots in
chain case to secure motor to motor mount (B).
3. Install nuts and torque to 75 lb-ft (102 N·m).
Figure 6.242: Reel Drive Motor
4. Align keyway in sprocket (A) with key in shaft and slide
sprocket onto shaft.
5. Route chain (B) over sprockets.
Figure 6.243: Reel Drive
169894 368 Revision A