MacDon FD75 OM User Manual
Page 406
Advertising
7.
Retrieve wrench (A) from right-hand adapter leg.
Figure 6.294: Torque Wrench
8.
Place torque wrench (A) on bolt (B).
Figure 6.295: Balance Linkage
9.
Check that pointer (D) is properly positioned as follows:
a.
Use wrench (A) to move bell crank (B) so that lower
edge of bell crank is parallel to top-link (C).
b.
Check that pointer (D) is lined up with the top-link
(C). Bend pointer if necessary.
Figure 6.296: Balance Linkage
169894
392
Revision A
Advertising