Removing endshields – MacDon FD75 OM User Manual
Page 51
Advertising
3.
Push in shield to engage lower latch (A).
4.
Use tool (B) to lock lower latch (A).
Figure 4.11: Endshield
5.
Replace tool (B) and lynch pin (A) on top pin (C).
Figure 4.12: Endshield Pin
Removing Endshields
To remove an endshield, follow these steps:
1.
Open endshield. Refer to
2.
Remove acorn nut (A) that secures the endshield to
support (B).
3.
Lift endshield off support (B).
Figure 4.13: Removing Endshield
169894
37
Revision A
Advertising