MacDon FD75 OM - Manual (Page 399)

MAINTENANCE AND SERVICING
5. Lift endshield off supports.
Figure 6.282: Endshields
6. Move endshield (A) away from support (B), and place
new endshield (C) onto supports.
7. Reattach end of endshield (A) to support (B).
8. Reinstall bolts (D).
9. Tighten all hardware.
Figure 6.283: Endshields
Replacing Support
1. Lower header and reel, and shutdown engine. Remove key from ignition.
2. Manually rotate reel for access to endshield support (A)
to be replaced.
3. Remove bolt (B) from support (A).
4. Remove bolts (C) from support (A) and two
adjacent supports.
Figure 6.284: Endshield Supports
169894 385 Revision A