MacDon FD75 OM - Manual (Page 249)

HEADER ATTACHMENT/DETACHMENT
5.7.2 Attaching Header to Adapter and Combine
The FD75 FlexDraper
®
can be attached to the adapter from either Field configuration or Transport configuration.
CAUTION
Stop engine and remove key from ignition before leaving operator's seat for any reason. A child or even a
pet could engage an idling machine.
NOTE:
Stabilizer/Slow Speed Transport wheels can be used to support header. Refer to 4.7.1 Cutting Height,
page 51 .
1. Prop up hydraulic center-link (A) with pin (or equivalent
tool) at (B).
Figure 5.114: Center-Link
2. Ensure hooks (A) are in storage position as shown, not
interfering with entrance of adapter arms into channel
(B).
Figure 5.115: Header Underside
169894 235 Revision A