MacDon FD75 OM - Manual (Page 311)

MAINTENANCE AND SERVICING
5. Replace access cover (B), and secure with screws (A).
Coat screws with Loctite
®
#243 (or equivalent), and
torque to 75 in·lbf (8.5 N·m).
Figure 6.84: Auger
Replacing Auger Tine Guides
1. Remove tine (B) and plastic guide (D). Refer to
Removing Feed Auger Tines, page 294
Figure 6.85: Auger
2. Position plastic guide (B) from inside auger and secure
with screws (A). Coat screws with Loctite® #243 (or
equivalent), and torque to 75 in·lbf (8.5 N·m).
Figure 6.86: Auger
169894 297 Revision A