Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 169)

Editing Part Programs Off Line
Chapter 6
6-13
If the workstation was unable to complete the download procedure in
the allotted time frame, it displays this screen:
F1 - File F2 - Project F3 - Application F4 - Utility F5 - Configuration
Proj: Demo Appl: Download Util: Send Part Program
A time-out occurred ...
Press any key to continue ...
Pressing any key causes the workstation to return to the ODS main menu.
The programmer can upload a part program from the control’s memory to
the workstation by using the ODS Upload application. This allows the part
program to be edited or stored on the workstation.
1. Interface the workstation with the control. See page 6-6.
2. Return to the main menu line of ODS.
6.5
UPLOAD Part Programs to
ODS