Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 766)

Chapter 30
Using a 9/Series Dual--Processing System
30-26
3. Press the
{INTERF CHECK}
softkey to display the interference
checking data entry screen shown in Figure 30.13.
(softkey level 3)
ZONE
LIMITS
F1-F9 DRLCYC
PARAM
INTERF
CHECK
Figure 30.13
Interference Checking Data Table
SEARCH
NUMBER
REPLCE
VALUE
ADD TO
VALUE
MORE
ZONES
BACKUP
INTERF
INTERFERENCE TABLE
PAGE 1 OF 32
TOOL NO AREA 1 AREA 2
*1 [INCH] [INCH]
X PLUS 1.5000 1.5000
X MINUS -.5000 -1.0000
Z PLUS 1.5000 6.0000
Z MINUS 0.0000 1.5000
<FRONT TURRET>
4. Select a process. Refer to the system installer’s documentation for
details on selecting a process, or press the
[PROC SELECT]
key.
5. Select a boundary number to enter by using one of these two
methods. Press:
the
{MORE ZONES}
softkey, or press the [¯] key while holding
down the
[SHIFT]
key.
the
{SEARCH NUMBER}
softkey. Enter the desired boundary number
to search for and press the
[TRANSMIT]
key.