Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 628)

Drilling Cycles
Chapter 26
26-2
Table 26.A
Drilling Cycles
G-code Application Tool Movement Operation At Hole Bottom Retraction Movement
G80 Cancel Or End Fixed Cycle N/A N/A N/A
G81 Drilling Cycle,
No Dwell/Rapid Out Feed Retract Rapid Traverse
G82 Drilling Cycle,
Dwell/Rapid Out Feed Dwell / Retract Rapid Traverse
G83 Deep Hole Drilling Cycle Intermittent Feed Retract Rapid Traverse
G83.1 Deep Hole Peck
Drilling Cycle with Dwell Intermittent Feed Retract Rapid Traverse
G84 Right-Hand Tapping Cycle Feed Spindle or Live Tool Reversed / Retract Feed
G84.1 Left-Hand Tapping Cycle Feed Spindle or Live Tool Reversed / Retract Feed
G84.2 Right-Hand Solid-Tapping Cycle Feed Spindle or Live Tool Reversed / Retract Feed
G84.3 Left-Hand Solid-Tapping Cycle Feed Spindle or Live Tool Reversed / Retract Feed
G85 Boring Cycle,
No Dwell/Feed Out Feed Retract Feed
G86 Boring Cycle,
Tool Stop/Rapid Out Feed Spindle or Live Tool Stop / Retract Rapid Traverse
G86.1 Boring Cycle,
Tool Shift Feed Orient Spindle or Live Tool Stop / Retract Rapid Traverse
G87 Back Boring Cycle Feed Oriented Spindle or Live Tool Stop / Retract Rapid Traverse
G88 Boring Cycle
Spindle or Live Tool Stop/
Manually Out Feed Dwell / Retract
Spindle or Live Tool Stop / Retract
Manual/Rapid Traverse
G89 Boring Cycle,
Dwell/Feed Out Feed Dwell/Retract Feed