Rockwell Automation 8520 9/Series CNC Lathe User Manual
Page 220
Advertising
Displays and Graphics
Chapter 8
8-10
{TARGET} (Large Display)
The coordinate values in the current work coordinate system, of the end
point of commanded axis moves in normal size characters.
Figure 8.8
Results after Pressing
{TARGET}
Softkey
PRGRAM A B S
TARGET
D T G AXIS
SELECT
E-STOP
TARGET [ MM
]
(ACTIVE PROGRAM NAME)
X
-
7483 . 647
Z
-
7483 . 647
U
-
7483 . 647
F
0.000 MMPM S
00
{TARGET} (Small Display)
The coordinate values of the end point of the currently executing axis
move is displayed at a position in the current work coordinate system for
all system axes in the active process (only available when more than 9 axis
are AMPed in the system, or more than 8 axis in the process for dual
process systems).
Advertising