Rockwell Automation 8520 9/Series CNC Lathe User Manual
Page 473
Tool Control Functions
Chapter 20
20-17
Figure 20.2
Typical Tool Group Directory Screen
EDIT
GROUP
DELETE
GROUP
DELETE
ALL
ENTRY GROUP NO:
TOOL GROUP DIRECTORY
PAGE 1 0F 1
(FILE NAME)
GROUP
TOOL NUMBER
1
1
2
44
88
2
55
63
90
99
At this point, you can delete any or all tool groups that already exist for
some reason follow these steps:
To delete:
Press:
select tool group
the {DELETE GROUP} softkey. Key in the desired group number to delete
and press the [TRANSMIT] key. This deletes all information in the tool group
including the tool offset numbers, threshold rate, tool numbers, etc.
all of the tool groups
the {DELETE ALL} softkey. The control prompts “DELETE ALL TOOL
MANAGEMENT DATA? (Y/N):”. Entering “Y”deletes all tool management
data that has been entered into the management tables (this does not delete
any G10 programs that are backups or used to set the tool management
tables). Entering “N”aborts the delete operation.
4.
Key in the group number that is to be edited. When you select the
correct group, press the [EDIT GROUP] key. Figure 20.3 shows all
of the information for that tool group that is displayed.