Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 171)

Editing Part Programs Off Line
Chapter 6
6-15
6. Use the arrow keys to highlight the Get Part Program option, then
press
[ENTER]
, or press
[R].
The workstation displays this screen:
F1 - File F2 - Project F3 - Application F4 - Utility F5 - Configuration
Proj: Demo Appl: Part Program Util: Get Part Program
Upload Origin
Control (C)
(S) Storage
7. Use the arrow keys to highlight the upload origin, then press
[ENTER]
or press the letter that corresponds to the upload origin.
The workstation displays the part program files that are stored on the
control or storage device:
F1 - File F2 - Project F3 - Application F4 - Utility F5 - Configuration
Proj: Demo Appl: Part Program Util: Get Part Program
FILE1 FILE2 FILE3
Upload From...
Use ARROW keys or Type in name. Press ENTER when done, or ESC to cancel.