Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 223)

Displays and Graphics
Chapter 8
8-13
{DTG} (Large Display)
The distance from current position to the command end point of the
commanded axis move in large characters.
Figure 8.11
Results After Pressing {DTG} (Large Display) Softkey
PRGRAM A B S TARGET D T G AXIS
SELECT
DISTANCE TO GO[ MM ] (ACTIVE PROGRAM NAME)
X 0.021
Z 0.000
U 0.000
F 0.000 MMPM S 00
E-STOP
{DTG} (Small Display)
The distance from the current position to the command end point, of the
commanded axis in normal size characters is displayed for all system axes
in the active process (only available when more than 9 axis are AMPed in
the system, or more than 8 axis in the process for dual process systems).