Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 865)

9/Series PAL Reference Manual
Index (General)
9/Series Lathe
Index
Operation and Programming Manual
i
Numbers
7300 Series CNC Tape
Compatibility
9/240 G--Codes Applicable, D-12
Automatic MultiPass Roughing, D-3
Automatic Thread Cutting (G28, G29), D-3
Features Not Supported on 9/240, D-13
G--Code Considerations, D-1
M--Code Considerations, D-7
Overview, D-1
Tool Length Offset, D-8
Tool Life Management, D-8
Part Programs
Copying into 9/240 Memory, D-9
Executing from 9/240, D-11
Pattern Repeat, D-10
Storing in 9/240 Memory, D-9
A
A-Word, 10-21
Absolute Coordinates, 11-1
Absolute Mode, 13-2
Absolute Position Display, 8-6
Acceleration/Deceleration, for Short Blocks, 18-19
Access Control, 2-23
Assigning Access Levels and Passwords, 2-24
Passwords, Entering, 2-29
Protection of Passwords, 2-27
Active Process, Selecting for a Dual-Process, 30-2
All Position Display, 8-19
AMP, Reference Manual, 1-5
AMP Feedrates, 18-8
ASCII (RS-358-B), 9-7
Auto Erase, 8-32
Auto File Name, 9-7
Auto Size, 8-30
Automatic Acceleration/Dec, 18-10
Automatic Machine Home, 14-12
Automatic Mode, 7-23
Automatic Return from Machine Home (G29), 14-15
Automatic Tool Management, 20-14
Axis, setup, see AMP manual, 1-5
Axis Detach, 2-40, 4-8
Axis Direction, 2-13
Axis Inhibit Mode, 7-20
Axis Motion, 10-20
Axis Clamp, 14-22
Axis Names, 10-20
Axis Position Data Display, 8-1
Axis Select (Large Display Screens Only), 8-15
B
B-Word, 10-33
Backing Up Interference Tables, 30-29
Backing Up Parameter Values, 28-41
Backup Memory
Definition, 1-4
Password Protection, 2-29
Setting
Power--on Time/After Reset, 2-44
Power--on Time/Overall, 2-43
Baud Rate, Selecting MAX, 9-5
Baud Rate, Setup, 9-5
Block Delete, 7-1, 10-10
Block Look Ahead, 21-52
Block Retrace, 7-31
Boring Cycles
Back Boring Cycle (G87), 26-2
Back Boring Cycles (G87), 26-31
Feed Out (G85), 26-2, 26-25
Spindle Shift (G86.1), 26-2, 26-28
Spindle Stop, Rapid Out (G86), 26-2, 26-27
with Dwell, Feed Out (G89), 26-2, 26-36
with Dwell, Spindle Stop, Rapid Out (G86), 26-2,
26-27
without Dwell, Rapid Out (G87), 26-2, 26-31