Split on/off – Rockwell Automation 8520 9/Series CNC Lathe User Manual
Page 231
Displays and Graphics
Chapter 8
8-21
{SPLIT ON/OFF}
The split screen softkey is only available if your system installer has
purchased the dual-process option.
When you press the
{SPLIT ON/OFF}
softkey, you can view information
for both processes. The screen displays two 40-column screens on one
80-column screen. Process 1 is displayed on the left, and process 2 is
displayed on the right. The active process appears in reverse video.
You can display axis display, M-code, G-code, and large axis screens as a
split screens.
Important: You can only select one process on the split screen at a time.
The selected process appears in reverse video. If only one process is
AMPed, the split screen display is disabled.
<FRONT TURRET>
<REAR TURRET>
E-STOP
PRGAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
PROGRAM [MM]
X
0.000
Z
0.000
U
0.000
F
S
T
MEMORY
AUTO STOP N1999
N002G70:
N003M101:
F
S
T
PROGRAM [MM]
X
0.000
Z
0.000
U
0.000
MEMORY
AUTO STOP N9999
N001G90:
N002G70:
N003M101:
N001G90: