Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 195)

Running a Program
Chapter 7
7-19
To use the QuickCheck feature, follow these steps.
1. Select a program to check as described on page 7-5 and return to
softkey level 1.
2. Press the
{PRGRAM CHECK}
softkey.
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
3. Press the
{QUICK CHECK}
softkey.
(softkey level 2)
SELECT
PRGRAM
QUICK
CHECK
STOP
CHECK
T PATH
GRAPH
T PATH
DISABL
When you press the
{QUICK CHECK}
softkey, the next softkey level
lets you select graphics.
4. Press the
{SYNTAX ONLY}
softkey.
(softkey level 3)
GRAPH SYNTAX
ONLY
When you press the {SYNTAX ONLY} softkey, it appears in reverse
video.
5. Press the
<CYCLE START>
button.
When you press the
<CYCLE START>
button, the program blocks are
executed.
If a program block contains an error, the program check stops and the
control displays the message “ERROR FOUND.”
To continue checking the remaining program blocks, press the
<CYCLE START>
button again. If no more errors are found, the control
displays the message “COMPLETED WITH ERROR (S)” and the part
program is automatically deactivated to allow editing.
If the control finds no errors during QuickCheck the program screen
displays the message “COMPLETED WITH NO ERRORS”. The control
then automatically resets the program to the first block.