Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 64)

Basic Control Operation
Chapter 2
2-42
Important: Some softkeys shown in Figure 2.11 might not appear on your
system due to restricted access. Refer to the beginning of this section and
page 2-23 for details.
You can modify the values on this screen. Press the
{ED PRT INFO}
,
{SET DATE}
, or the
{SET TIME}
softkeys as explained in the Screen Field
Definitions that follow.
Press the exit softkey { Ý } to save changes and return to the “Active
Program” screen.
Time Part Screen Field Definitions
Program -- is the currently active part program, displayed automatically
by the control.
Date -- is the current date setting. To change this setting:
1. Press the {SET DATE} softkey, provided that you have
supervisor-level access.
You are prompted for a new date with a line that displays the current
date setting.
2. Press the
[DEL]
key to erase the characters displayed.
3. Type in the new date.
You must use one of these formats:
Format: Language:
Month / Day / Year English
Year / Month / Day Japanese
Day / Month / Year German
Time -- is the current 24-hour time setting. It can be changed by pressing
the
{SET TIME}
softkey, provided that you have supervisor-level access.
You are prompted for a new time with a line that displays the current time
setting. Change the current setting by pressing the
[DEL]
key to erase the
characters displayed and then typing in the new time. You must enter
using the format Hours:Minutes:Seconds. For example, 2:00 pm should be
entered as 14:00:00.