Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 184)

Running a Program
Chapter 7
7-8
3. Press the
{ACTIVE PRGRAM}
softkey to activate the selected program.
The control displays the part program name, followed by the first few
blocks of the selected program.
Important: The following softkey level 2 indicates that the control is
using control memory as an input device. If the input device is some
device other than control memory, some of these softkeys are not available.
REFORM
MEMORY
CHANGE
DIR
ACTIVE
PRGRAM
EDIT
PRGRAM
RESTRT
PRGRAM
DISPLY
PRGRAM
COPY
PRGRAM
DELETE
PRGRAM
VERIFY
PRGRAM
PRGRAM
COMENT
RENAME
PRGRAM
INPUT
DEVICE
(softkey level 2)
Important: Before you can execute the program, you must place the
control in automatic mode.
To select a different part program for automatic execution, you must
deactivate the part program that is currently active. Follow these steps:
1. Press the
{PRGRAM MANAGE}
softkey. The control displays the
program directory screen.
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
7.4
Deselecting a Part Program