Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 47)

Basic Control Operation
Chapter 2
2-25
2. Press the
{ACCESS CONTRL}
softkey. If the
{ACCESS CONTRL}
softkey does not appear on the screen, the currently active access
level is not allowed to use the
{ACCESS CONTRL}
function. Enter a
password that has access to
{ACCESS CONTRL}
.
(softkey level 2)
ACCESS
CONTRL
This screen appears.
UPDATE
& EXIT
01 02 03 04
PASSWORD NAME -- (current password)
1 ACTIVE PROGRAM 18 ACCESS CONTROL
2 PROGRAM MANAGE 19 SWITCH LANGUAGE
3 EDIT PROGRAM 20 POWER UP LEVEL
4 COPY PROGRAM 21 TIME PARTS
5 RENAME PROGRAM 22 SI/OEM MESSAGE
6 DELETE PROGRAM 23 SCALING
7 DELETE ALL PROGRAM 24 CHANGE DIRECTORY
8 OFFSETS 25 AUX COMM
9 TOOL WEAR 26 SEARCH MONITOR
10 TOOL GEOMETRY 27
11 ACTIVE OFFSET 28
12 BACKUP OFFSET 29
13 QUICK CHECK 30
14 SYSTEM SUPPORT 31
15 PRGRAM PARAMETER 32
16 AMP 33
17 PARAMACRO PROG 34
NOTE: Some of these protected features are not available on 9/240 controls.
The softkey names change to display the 8 access levels along with
their corresponding passwords (provided that a password has been
assigned to that access level). Only the password names of access
levels that are lower than the currently active access level are shown.