Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 46)

Basic Control Operation
Chapter 2
2-24
This section describes setting or changing the functions assigned to a
particular access level, and changing the password used to activate that
access level.
Important: Functions or passwords can be assigned to another access
level only if:
If you have a higher access level than the access level you are
attempting to change, this means that if your password is assigned to
access level 6, you can only change the functions or passwords for
access levels 7 and 8. Functions, or a password, cannot be assigned to
access level 6 with a level 6 password.
Functions that are not available to the current user cannot be assigned to
other levels. If a user with access level 6 is changing a lower access
level functions, access level 6 must have access to any functions that are
changed. For example, if you are an access level 6 user, you do not
have access to {SYSTEM SUPORT} , you cannot assign or remove
{SYSTEM SUPORT}
to access level 7.
The current user must have access to the
{ACCESS CONTROL}
function.
To change the functions or password of a lower user number, follow these
steps:
1. Press the
{PASSWORD}
softkey.
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
2.7.1
Assigning Access Levels
and Passwords