Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 699)

Paramacros
Chapter 28
28-25
#5081 to 5089 or #5581 to 5592 Active Tool Length Offsets
These are read-only parameters. They correspond to the currently active
tool length offsets (see chapter 20).
5081 Current axis 1 tool length offset. 5087 Current axis 7 tool length offset.
5082 Current axis 2 tool length offset. 5088 Current axis 8 tool length offset.
5083 Current axis 3 tool length offset. 5089 Current axis 9 tool length offset.
5084 Current axis 4 tool length offset.
5085 Current axis 5 tool length offset.
5086 Current axis 6 tool length offset.
Or if your system has more than 9 axes:
5581 Current axis 1 tool length offset. 5587 Current axis 7 tool length offset.
5582 Current axis 2 tool length offset. 5588 Current axis 8 tool length offset.
5583 Current axis 3 tool length offset. 5589 Current axis 9 tool length offset.
5584 Current axis 4 tool length offset. 5590 Current axis 10 tool length offset.
5585 Current axis 5 tool length offset. 5591 Current axis 11 tool length offset.
5586 Current axis 6 tool length offset. 5592 Current axis 12 tool length offset.
#5095 to 5096
Probe stylus Length and Radius
These parameters correspond to the values set in the probing cycle
parameter table discussed in chapter 27. When values are assigned to these
parameters, the current values in the probe table is replaced.
5095 Probe stylus Length
5096 Probe stylus Radius
For details on probe radius and length parameters, see chapter 27 on tool gauging.
#5101 to 5112
Current Following Error
These parameters are read-only. They correspond to the current following
error for an axis.
5101 Axis 1 following error 5107 Axis 7 following error
5102 Axis 2 following error 5108 Axis 8 following error
5103 Axis 3 following error 5109 Axis 9 following error
5104 Axis 4 following error 5110 Axis 10 following error
5105 Axis 5 following error 5111 Axis 11 following error
5106 Axis 6 following error 5112 Axis 12 following error