Rockwell Automation 8520 9/Series CNC Lathe User Manual
Page 48
Basic Control Operation
Chapter 2
2-26
3.
Press the softkey that corresponds to the access level that you want to
change. The pressed softkey appears in reverse video, and the
password name assigned to that access level is moved to the
“PASSWORD NAME.”
Important: If you attempt to change the functions available to an access
level that is equal to or higher than your the current access level, the error
message “ACCESS TO THIS LEVEL IS NOT ALLOWED.” You cannot
change the features that are assigned to your current access level or any
level that is higher than your own.
(softkey level 3)
UPDATE
& EXIT
01
(NAME)
02
(NAME)
03
(NAME)
04
(NAME)
4.
If you want to enter or change the password for the selected level,
edit the password next to the “PASSWORD NAME”prompt by using
the input cursor as described on page 2-37. If you also want to
change the functions for this password, move on to step 5. To save
the change made to the password and leave the access control screen
press the
{UPDATE & EXIT}
softkey.
Functions that are currently available to the selected level are shown
in reverse video on the access level screen.
5.
Use the up, down, right, and left cursor keys to select the functions to
change for that access level. The selected function is shown with a
flashing > to the left of the function.
6.
Pressing the
[TRANSMIT]
key toggles the function between accessible
and inaccessible for that access level.
Important: If you attempt to activate or deactivate a function that is not
accessible to the current user’s access level, the message “ACCESS TO
THIS FUNCTION NOT ALLOWED” is displayed. Only features that are
accessible to your the current access level can be selected as accessible or
inaccessible to a lower access level.
7.
Press the
{UPDATE & EXIT}
softkey to store the changes made to
accessible functions for the user levels and return the control to
softkey level 1.
(softkey level 3)
UPDATE
& EXIT
01
(NAME)
02
(NAME)
03
(NAME)
04
(NAME)