Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 866)

9/Series PAL Reference Manual
Index (General)
9/Series Lathe
Index
Operation and Programming Manual
ii
C
C Axis, Virtual, 17-13
C-Word, 10-21
Cancel Fixed Cycle (G80), 26-8
Casting/Forging Roughing Cycle Routine (G75), 24-29
Chamfering and Corner Radius, 16-1
Changing Languages, 8-23
Changing Parameters
Auto Erase, 8-32
Auto Size, 8-30
Grid Lines, 8-30
Overtravel Zone Lines, 8-30
Process Speed, 8-32
Rapid Traverse, 8-29
Select Graph, 8-29
Sequence Starting #:, 8-31
Sequence Stopping #:, 8-31
Changing parameters, {GRAPH SETUP}, 8-28
Chinese, Language Display, 8-23
Circular Interpolation Mode (G02, G03), 14-4
Circular QuickPath Plus, 15-7
Clearing Screen, 8-33
Clock, System, 2-40
Comment Blocks, 10-9
Comment Display, 5-39
Communication Between Processes, 30-6
Communications, 9-1
Communications Module Installed, 8-37
Communications Port Configuration, 9-1
Communications Port Parameters, 9-3
Conditional Operators, 28-7
Constant Surface Speed Mode, (G96), 17-3
Contour Blocks, 24-1
Controlling Spindles, (G12.1, G12.2, G12.3), 17-9
Coordiante System, 11-1
Coordinate Offset, on shared axis, 30-35
Copying Programs, 5-16, 5-41
Coupling dual axes, on dual process controls, 30-38
CRT, 2-10
CRT Displays, 8-1
CRT screen saver, 8-38
CSS Mode, (G96), 17-3
Cursor, Moving, 5-6
Custom Screens, through PAL, 8-22
Cutter Compensation (G41, G42)
Error Detection, Disabling, 21-54
Type A, Overview, 21-4
Type B, Overview, 21-4
Cycle Start, 2-12
Cycle Start for Dual-Processing, 30-2
Cycle Stop, 2-13
Cycle Stop for Dual-Processing, 30-11
D
Data Length, for communications, 9-6
Date, Setting, 2-40
De-coupling duals
drilling axis, 30-41
on dual processing, 30-38
programming de-coupled axes, 30-40
Deep Hole Drill Cycle (G83), 26-12
Deleting a Program, 5-36
Device Setup, 9-2
Diameter Mode (G08), 13-5
Digitizing a Program, 5-28
Arc (3 Points), 5-32
ARC Tangent at End Points, 5-34
Linear, 5-31
Display Pages, PAL, 8-22
Display Screens, Scaling and Axis Position, 13-10
Display Select, 8-1
Displaying a Program {DISPLY PRGRAM}, 5-38
Displaying Machine Information, 8-33