Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 431)

Programming Feedrates
Chapter 18
18-5
Since the G95 code is modal any F-word designated in any block after the
G95 is considered a feed distance per spindle revolution until a G94 is
executed.
Figure 18.4
Feed Per Revolution Mode (G95)
Chuck
Workpiece
Cutting tool
F
“F”is the distance the tool moves per
revolution of the workpiece.
Cutting tool
B
Chuck
Workpiece
A
If G95 F.2 is the feedrate, the tool moves from
A to B in 100 revolutions of the workpiece.
20.0