Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 85)

Offset Table and Setup
Chapter 3
3-17
(softkey level 1)
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
QUICK
CHECK
SYSTEM
SUPORT
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
2. Press the {WORK CO-ORD} softkey to display the offset values for the
work coordinate systems and the external offset. See Figure 3.9.
(softkey level 2)
Figure 3.9
Work Coordinate System Setting
3. Move the cursor to the offset data that you want to modify. Use the
up, down, left, or right cursor keys to move the block cursor to the