Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 40)

Basic Control Operation
Chapter 2
2-18
2. Select one of these softkey options:
block retrace
jog retract
cycle start
cycle stop
To Perform a: Press:
Cycle Start the softkey that corresponds to the desired feature. Details on these
features are described in chapter 7.
Cycle Stop the softkey that corresponds to the desired feature. Details on these
features are described in chapter 7.
Block Retrace the {BLOCK RETRCE} softkey. The control automatically
retraces the previously executed block each time you press. The tool
returns to the start point of Block Retrace when you press the
{CYCLE START}
softkey. Details on Block Retrace can be found
in chapter 7.
Jog Retract the {JOG RETRCT} softkey. This calls up the jog retract screen.
Select: the axis, the type of jog, the speed multiply value (see
chapter 4), or the HPG number (if HPG has been selected as the
type of jog). Use the up and down cursor keys to select the function,
and the left and right cursor keys to alter the value assigned to that
function.
3. Press the {JOG AXES +} or {JOG AXES -} softkeys to select the
direction to jog the axis. Press the exit { Ý } softkey when you
complete the jog retract. The cutting tool automatically retraces the
jog moves you made when you pressed the
{CYCLE START}
. See
chapter 7.
(softkey level 4)
SET
ZERO
JOG
AXES +
JOG
AXES-