Rockwell Automation 8520 9/Series CNC Lathe - Manual (Page 356)

Coordinate Control
Chapter 13
13-14
G37, G37.1 - G37.4
Gxx Z__
Z (scaled)
G73, G74, G76, G82, G83, G84
G85, G86, G87, G88, G89
Gxx X__ Y__ Z__R__I__Q__K__P__F__L__
X (scaled)
Y (scaled)
Z (scaled)
R (scaled)
I (not scaled)
Q (not scaled)
K (not scaled)
P (not scaled)
F (not scaled)
L (not scaled)
Important: R uses the scale factor associated with the axis that is
perpendicular to the active plane.
These cycles assume that Lathe type C is selected:
G73, G74, G75
Scaling is not applied to the block containing the G-code. Scaling is
applied to the contour blocks defining the workpiece.
G76, G77
Gxx X__Z__I__K__F__D__
X (scaled)
Z (scaled)
I (scaled)
K (not scaled)
F (not scaled)
D (not scaled)