Program execute screen – Rockwell Automation 8520 9/Series CNC Lathe User Manual
Page 39
Advertising
![background image](/manuals/579999/39/background.png)
Basic Control Operation
Chapter 2
2-17
Program Execute Screen
The following assumes that the steps have been performed to display the
Software Front Panel screen (see page 2-15). Make sure that the function
selected on the Software Front Panel screen is not the Mirror Image nor
the Axis Inhibit feature.
1.
Press the
{PRGRAM EXEC}
softkey.
(softkey level 2)
JOG
AXIS
PRGRAM
EXEC
This screen appears. Before you press this softkey, a program should
have already been selected for automatic execution as described on
page 7-6.
PROGRAM[ MM
]
F
0.000 MMPM
Z
0.000
S
0.0
R X
0.000
T 0
C
359.99
FILENAME
SUB NAME
MEMORY
MAN
STOP
M100;
G90;
Z10;
G70;
BLOCK
RETRCE
JOG
RETRCT
CYCLE
START
CYCLE
STOP
E-STOP
Advertising