Rockwell Automation Liqui-Flo V2.0 AC Drive - Manual (Page 116)

116 Rockwell Automation Publication D2-3518-3 - May 2013
Chapter 9
Enables/disables the feature that saves the present MOP (motor-operated
potentiometer) frequency reference at power down or at stop.
The MOP is an output frequency value internal to the drive firmware.
Figure 44 - Save MOP Ref (194)
Sets the rate of change of the MOP reference in response to a digital input. The
MOP is an output frequency value internal to the drive firmware.
Displays the present parameter access level. See Selecting the Parameter Access
Level on page 63 for more information about parameter access levels.
194 Save MOP Ref
Range: See Figure 44
Default: See Figure 44
Access: 1 Path: Utility > MOP Config
See also:
195 MOP Rate
Range: 0.2...250.0 [0.1 Hz/sec]
Default: 1.0 Hz/sec
Access: 1 Path: Utility > MOP Config
See also:
196 Param Access Lvl
Range: 0 = Basic
1 = Advanced
Default: 0
Access: 0 Path: Utility > Drive Memory
See also:
0 x x 0 x x x x x x x x x x x x
0 0 1 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Save
0 =Do Not Save
x =Reserved
Bit #
Factory Default Bit Values
At P
owr Do
wn
At Stop
Nibble 1 Nibble 2 Nibble 3 Nibble 4