Power module components locations (frame 4) – Rockwell Automation Liqui-Flo V2.0 AC Drive User Manual
Page 21

Rockwell Automation Publication D2-3518-3 - May 2013
21
Chapter 2
Power Module Components Locations (Frame 4)
Frame 4 Units LF200900CCR and LF201215CCR
The power module section contains the following main components. The
numbered items listed below correspond to the numbers used in
and
. Replacement parts are listed in
.
1.
Combined Power PCB Assembly, 900 A, or
Combined Power PCB Assembly, 1215 A
2.
Wire Harness Assembly, Gate Driver
3.
Internal Fan, 24V DC
4.
Internal Fan, 24V DC
5.
Wire Harness Assembly, Internal Fan
6.
Wire Harness Assembly, DC Power
7.
Wire Harness Assembly, DC Bus Resistors
8.
Current Feedback Device, 2000 A
9.
Wire Harness Assembly, Current Feedback Device, Rectifier Side
10.
Wire Harness Assembly, Current Feedback Device, Inverter Side
11.
Wire Harness Assembly, RTD, Recitifier Side
12.
Wire Harness Assembly, RTD, Inverter Side
13.
Cable Assembly, 40-Pin
14.
Combined Control PCB Assembly
15.
Combined I/O PCB Assembly
16.
RS-485 Communications Assembly (optional)
17.
Cable Assembly, 20-Pin (optional)
18.
Cable, Mini DIN, 8 Pos., Male/Male, 1 m (3.2 ft)