Rockwell Automation Liqui-Flo V2.0 AC Drive User Manual
Page 182
182
Rockwell Automation Publication D2-3518-3 - May 2013
Chapter 9
This parameter is not used in the Liquiflo 2.0 rectifier.
This parameter is not used in the Liquiflo 2.0 rectifier.
Reserved for future alarms.
Reserved for inhibit bits.
Displays status of the rectifier digital inputs.
See
AC Line I/O Board Description (Frame 3 Only) on page 25
through
Combined I/O Board Description (Frame 4 Only) on page 29
for a description
of I/O hardware that is present on this drive and is controlled by the rectifier.
201
Language
Range:
0...10
Default:
Read Only
Access:
0
Path: Utility > Drive Memory
See also:
203
Drive Checksum
Range:
0...65535
Default:
Read Only
Access:
0
Path: Utility > Drive Memory
See also:
211
Drive Alarm
Range:
Default:
Read Only
Access:
0
Path: Utility > Status
See also:
214
Start Inhibits
Range:
Default:
Read Only
Access:
0
Path: Utility > Status
See also:
216
Dig In Status
Range:
Bits on/off
Default:
Read Only
Access:
0
Path: Utility > Status
See also: