Rockwell Automation Liqui-Flo V2.0 AC Drive - Manual (Page 131)

Rockwell Automation Publication D2-3518-3 - May 2013 131
Chapter 9
Selects alarm conditions that initiate a drive alarm. See Chapter 10 for more
information about alarms.
Figure 58 - Alarm Config 1 (259)
Resets all Alarm1...8 Code parameters (262...269) to zero.
After a Clear Alarm Queue operation, the value of this parameter returns to 0 for
Ready
.
A code that represents a drive alarm. The codes appear in the order that the
alarms occur. The first code in is the first out. A time stamp is not available with
alarms.
259 Alarm Config 1
Range: See Figure 58
Default: See Figure 58
Access: 1 Path: Utility > Alarms
See also:
261 Alarm Clear
Range: 0 = Ready
1 = Clr Alarm Que
Default: 0 = Ready
Access: 1 Path: Utility > Alarms
See also: 262...269
262
263
264
265
266
267
268
269 Alarm 1 Code
Alarm 2 Code
Alarm 3 Code
Alarm 4 Code
Alarm 5 Code
Alarm 6 Code
Alarm 7 Code
Alarm 8 Code
Range: 0...65535
Default: Read Only
Access: 1 Path: Utility > Alarms
See also: 261
1 1 1 1 1 1 1 1 1 1 1 1 1 =Enabled
0 =Disabled
x =Reserved
Bit #
Factory Default Bit Values
x x x x
0 0 1 1 2 3 4 5 6 7 8 9 11 12 13 14 15
Prechrg Actv UnderV
oltage
Po
w
er Loss
Str At PwrUp Anlg in Loss IntDBRes OH Dr
v OL Lvl 1
Dr
v OL L
Vl 2
Decel Inhibit Waking Not Synced Phased ACB
Nibble 1 Nibble 2 Nibble 3 Nibble 4