Rockwell Automation Liqui-Flo V2.0 AC Drive - Manual (Page 54)

54 Rockwell Automation Publication D2-3518-3 - May 2013
Chapter 7
Running the Start-up
Routines To access the start-up routines, select the Start-Up icon from the main menu as
shown in
Figure 23
Figure 23 - Accessing the Start-Up Routines
The Start-Up menu screen contains eight selections. The first seven menu items
contain the most commonly used parameters associated with each function. See
Figure 24 .
Figure 24 - Start-Up Menu
The Start-up routine automates the process of entering values of selected
parameters by taking you to the next parameter after you accept a parameter
value. As each item in the list is completed, you are automatically advanced to the
next step.
Exiting Before Completing
the Start-Up Routines To exit the Start-up routines, press the F4 key (Exit). When you select the
Start-up icon from the main menu again, you are prompted to either continue or
restart the Start-up routines. If you select Continue, you are returned to the
point at which you exited.
IMPORTANT
Parameter values are saved as they are changed. Pressing or aborting the
Start-up routine does not undo the changes.
Lang
P0: LiquiFlo 2.0
Auto Stopped
Main Menu
Start-Up
Highlight Start-Up icon
Select
Monitor
>>
Start-Up
Main Menu
Input
Voltage
Motor
Data
Motor
Tests
Speed
Limits
Ref Setup
Configure
I/O
Configure for
Alternate
Input Voltage
Enter Motor
Nameplate
Data
Optimize
Torque and
Verify Direction
Set Min/Max
Speed, Stop
Mode, and
Direction Conrol
Done
Set
Reference
Control
Source
Set TB I/O
Functions
Intro
Press
ESC/
PROG