Rockwell Automation Liqui-Flo V2.0 AC Drive User Manual
Page 151
Rockwell Automation Publication D2-3518-3 - May 2013
151
Chapter 9
Displays the measured voltage of the +12V power supply.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
Displays the measured voltage of the -12V power supply.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
Displays the measured voltage that identifies which type of Comblined I/O
board is installed.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.x series.
352
Inv PS +12
Range:
-3276.8V...3276.7V °C
Default:
Read Only
Access:
1
Path: Inputs & Outputs > Temperature etc
See also:
353
Inv PS -12V
Range:
-3276.8V...3276.7V °C
Default:
Read Only
Access:
1
Path: Inputs & Outputs > Temperature etc
See also:
354
Inv I/O ID V
Range:
-3276.8V...3276.7V °C
Default:
Read Only
Access:
1
Path: Inputs & Outputs > Temperature etc
See also: