Rockwell Automation Liqui-Flo V2.0 AC Drive User Manual
Page 193
Rockwell Automation Publication D2-3518-3 - May 2013
193
Chapter 9
Displays the measured rectifier coldplate temperature in degrees C. This
parameter is only usable if a coldplate temperature sensor is installed in the drive.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.
x series.
Displays the measured ambient temperature inside the power module in
degrees C.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.
x series.
Displays the measured drive power supply temperature in degrees C.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.
x series.
Displays the measured voltage of the +12V power supply.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.
x series.
349
Rct Coldplt Tmp
Range:
-3276.8...3276.7 °C
Default:
Read Only
Access:
1
Path: Inputs & Outputs > Temperature etc
See also:
350
Rct Ambient Tmp
Range:
-3276.8...3276.7 °C
Default:
Read Only
Access:
1
Path: Inputs & Outputs > Temperature etc
See also:
351
Rct PS Tmp
Range:
-3276.8...3276.7 °C
Default:
Read Only
Access:
1
Path: Inputs & Outputs > Temperature etc
See also:
352
Rct PS +12V
Range:
-3276.8...3276.7V °C
Default:
Read Only
Access:
1
Path: Inputs & Outputs > Temperature etc
See also: