Rockwell Automation Liqui-Flo V2.0 AC Drive User Manual
Page 168
168
Rockwell Automation Publication D2-3518-3 - May 2013
Chapter 9
The rectifier rated RMS input voltage is displayed as
x.x V AC.
The rectifier rated RMS input current is displayed as
x.x A.
The rectifier software version number is displayed as
x.xxx.
The allowed level of imbalance in input voltage entered as
x.x%.
An Input V Imbalance fault (fault 226) is generated if Line V Imbalance (23) is
greater than V Imbalance Lmt (60) for this amount of time.
27
Rated Volts
Range
0.0...6553.5 V AC [0.1V AC]
Default:
Read Only
Access:
0
Path: Monitor > Drive Data
See also:
28
Rated Amps
Range:
0.0...6553.5 A [0.1 A]
Default:
Read Only
Access:
0
Path: Monitor > Drive Data
See also:
29
Control SW Ver
Range:
x.xxx
Default:
Read Only
Access:
0
Path: Monitor > Drive Data
See also:
60
V Imbalance Lmt
Range:
Path: 0.0 to 20.0% [0.1%]
Default:
10.0
Access:
0
Path: Configuration > AC Line
See also:
23, 61
61
V Imbalance Time
Range:
1.0...10.0 seconds [0.1 seconds]
Default:
1.0
Access:
0
Path: Configuration > AC Line
See also:
23, 60