Rockwell Automation Liqui-Flo V2.0 AC Drive - Manual (Page 147)

Rockwell Automation Publication D2-3518-3 - May 2013 147
Chapter 9
Figure 67 - Anlg Out Absolute (341)
Selects the source of the value that drives the user-configurable analog output.
See AC Line I/O Board Description (Frame 3 Only) on page 25 through
Combined I/O Board Description (Frame 4 Only) on page 29 for a description
of I/O hardware that is present on this drive and is controlled by the inverter.
Sets the user-configurable analog output value when the source value is at
maximum.
See AC Line I/O Board Description (Frame 3 Only) on page 25 through
Combined I/O Board Description (Frame 4 Only) on page 29 for a description
of I/O hardware that is present on this drive and is controlled by the inverter.
342 Analog Out1 Sel
Range: 0 = Output Freq
1 = Command Freq
2 = Output Amps
3 = Torque Amps
4 = Flux Amps
5 = Output Power
6 = Output Volts
7 = DC Bus Volts
8 = PI Reference
9 = PI Feedback
10 = PI Error
11 = PI Output
12 = %Motor OL
13 = %Drive OL
14 = Application
Default: 14 = Application
Access: 0 Path: Inputs & Outputs > Analog Outputs
See also: 1...7, 12, 135...138, 219, 220
343 Analog Out1 Hi
Range: 4.000...20.000 mA [0.001 mA]
-/+10.000V [0.1V]
0.0...10.000V [0.1V]
Default: 20.0 mA
Access: 0 Path: Inputs & Outputs > Analog Outputs
See also: 31, 342
x x x 0 x x x x x x x x x x x x
0 0 1 1 2 3 4 5 6 7 8 9 11 12 13 14 15
1 =Enabled
0 =Disabled
x =Reserved
Bit #
Factory Default Bit Values
Analog Out1
Nibble 1 Nibble 2 Nibble 3 Nibble 4