Rockwell Automation Liqui-Flo V2.0 AC Drive User Manual
Page 165
Rockwell Automation Publication D2-3518-3 - May 2013
165
Chapter 9
The input power is displayed as
x.x kW. Motoring power is positive and
generating power is negative.
The input power factor is displayed as 1.00 for unity. Values greater than 1
indicate leading power factor.
The elapsed kWh consumed is displayed as
x.x kWh. This parameter is reset
through the Reset Meters (200) parameter.
The elapsed kWh consumed is displayed as
x.x kWh. This parameter is reset
through the Reset Meters (200) parameter.
The elapsed run time is displayed as
x.x hours. This parameter is reset through
the Reset Meters (200) parameter.
13
Input kW
Range:
±
2400.0 kW [0.1 kW]
Default:
Read Only
Access:
0
Path: Monitor > Metering
See also:
14
Input Pwr Factor
Range:
0.00...2.00 [0.01]
Default:
Read Only
Access:
0
Path: Monitor > Metering
See also:
15
Motoring kWh
Range:
0.0...429496729.5 kWh [0.1 kWh]
Default:
Read Only
Access:
0
Path: Monitor > Metering
See also:
16
Regen kWh
Range:
0.0...429496729.5 kWh [0.1 kWh]
Default:
Read Only
Access:
0
Path: Monitor > Metering
See also:
17
Elapsed Run Time
Range:
0.0...429496729.5 hour [0.1 hour]
Default:
Read Only
Access:
0
Path: Monitor > Metering
See also: