Rockwell Automation Liqui-Flo V2.0 AC Drive User Manual
Page 194
Advertising
194
Rockwell Automation Publication D2-3518-3 - May 2013
Chapter 9
Displays the measured voltage of the –12V power supply.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.
x series.
Displays the measured voltage that identifies which type of IO board is installed.
This parameter is only present on Frame 4 drives. All such drives should have
firmware version numbers in the 2.
x series.
353
Rct PS -12V
Range:
-3276.8...3276.7V °C
Default:
Read Only
Access:
1
Path: Inputs & Outputs > Temperature etc
See also:
354
Rct I/O ID V
Range:
-3276.8...3276.7V °C
Default:
Read Only
Access:
1
Path: Inputs & Outputs > Temperature etc
See also:
Advertising