Rockwell Automation Liqui-Flo V2.0 AC Drive - Manual (Page 74)

74 Rockwell Automation Publication D2-3518-3 - May 2013
Chapter 9
The drive output voltage class.
The drive rated RMS output current.
The Main Control board software version.
Frame 3 drives (firmware version 1.x) only:
The lower byte of this parameter controls the state of the application digital
outputs on the AC Line I/O card. The upper byte controls the operation of the
rectifier when configured for manual operation.
See AC Line I/O Board Description (Frame 3 Only) on page 25 through
Combined I/O Board Description (Frame 4 Only) on page 29 for a description
of I/O hardware that is present on this drive and is controlled by the inverter.
27 Rated Volts
Range: 480V [0.1V AC]
Default: Read Only
Access: 1 Path: Monitor > Drive Data
See also:
28 Rated Amps
Range: 0.0...6553.5 Amps [0.1 A]
Default: Read Only
Access: 1 Path: Monitor > Drive Data
See also:
29 Control SW Ver
Range: 0.000...65.256 [0.001]
Default: Read Only
Access: 1 Path: Monitor > Drive Data
See also: 196
30 Appl Digital Out
Range: See Figure 30 and Figure 31
Default: See Figure 30 and Figure 31
Access: 1 Path: Monitor > Application
See also: