Rockwell Automation Liqui-Flo V2.0 AC Drive User Manual
Page 88
88
Rockwell Automation Publication D2-3518-3 - May 2013
Chapter 9
Sets the low limit for the speed reference after scaling is applied.
Sets the high limit for the speed reference after scaling is applied.
81
Minimum Speed
Range:
0.0 to Maximum Speed [0.1 Hz]
Default:
0.0 Hz
Access:
0
Path: Speed Command > Spd Mode & Limits
See also:
83, 92, 95
ATTENTION: The drive can operate at and maintain zero speed. You are
responsible for assuring safe conditions for operating personnel by providing
suitable guards, audible or visual alarms, or other devices to indicate that the
drive is operating or may operate at or near zero speed. Failure to observe this
precaution could result in severe bodily injury or loss of life.
82
Maximum Speed
Range:
5.0...250.0 [0.1 Hz]
Default:
60.0 Hz
Access:
0
Path: Speed Command > Spd Mode & Limits
See also:
55, 83, 91, 94, 202
ATTENTION: You are responsible for ensuring that driven machinery, all drive-
train mechanisms, and application material are capable of safe operation at the
maximum operating speed of the drive. Overspeed detection in the drive
determines when the drive shuts down. See
. Failure to observe this
precaution could result in bodily injury.