Hypertherm Powermax125 Service Manua - Manual (Page 288)

288 Powermax125 Service Manual 808070
10 – Torch Component Replacement
Replacing the torch body
Remove the torch body
1. Complete the following procedures:
a. See Disconnect the power, gas supply, and torch on page 266.
b. See Remove the mounting sleeve on page 285.
c. See Remove the cap sensor switch on page 287.
2. Remove the pilot terminal screw and wire. Set the screw aside.
Figure 146
3. Using a 3/8-inch and 1/2-inch wrench together (or 2 adjustable wrenches), loosen the nut that secures the gas
supply line to the torch to remove the torch body.
Figure 147
Kit Description
428147 Kit: Duramax Hyamp 180° machine torch main body replacement