Hypertherm Powermax125 Service Manua - Manual (Page 73)

Powermax125 Service Manual 808070 73
6 – Machine Torch Setup
11. If you are mounting a full-length machine torch, screw the positioning sleeve into the coupler. If you are mounting a
mini machine torch, screw the adapter into the coupler.
12. Screw the strain relief into the positioning sleeve (for a full-length machine torch) or the adapter (for a mini machine
torch).
13. Screw the strain relief nut into the strain relief.
14. Attach the torch to the lifter per the manufacturer’s instructions.
15. Reinstall the consumables in the torch.
Choose the machine torch consumables
Systems with the Duramax Hyamp 180° full-length machine torch or Duramax Hyamp 180° mini machine torch ship with
a starter consumable kit as well as a box of spare electrodes and nozzles. There are two starter mechanized consumable
kits. One includes the standard retaining cap, and one includes the ohmic retaining cap. Notice that the retaining cap,
electrode, and swirl ring are the same for cutting, gouging, and FineCut applications. Only the shield and nozzle are
different.
Both styles of machine torches use the same consumables. Mechanized consumables are shielded. Therefore, if the torch
touches the workpiece it will not damage the nozzle.
Machine torch consumables
Mechanized shielded 105 A/125 A consumables
Mechanized shielded 45 A and 65 A consumables
220976
Shield
220975
Nozzle
220971
Electrode
220997
Swirl ring
220977
Retaining cap
420168
Shield
220977
Retaining cap
420158 (45 A)
420169 (65 A)
Nozzle
220971
Electrode
220997
Swirl ring