NavCom SF-2040 Rev.C - Manual (Page 100)

LAND-PAK™ User Guide – Rev. C
5-96
Add a predefined or user defined coordinate
projection. Tap the arrow button in the top right of
the window. The System tab returns with the
added projection selecte
Refer to Figure 59 for the steps belo
5. Tap the Format tab.
d in the drop-down list.
w:
s Submenu – Format Tab
6. Select the appropriate settings.
‡
Angle Entry and Display: This option
applies to numerous commands, such
as prompting and displays in Sideshot
Traverse, Intersections and Inverse.
‡
Distance Observation Display and
Slope Entry and Display apply to total
stations.
Figure 59: Job Setting