NavCom SF-2040 Rev.C - Manual (Page 144)

LAND-PAK™ User Guide – Rev. C
6-140
c. Click the Transfer button.
d. Verify the file appears in the Data folder.
‡
A text file can be converted to a .crd
file on the Explorer 600+. Use the
File > Import/Export command.
„ Exercise 3: Create/Upload Geoid File to Explorer
1. Run X-Port.
Connect the Explorer 600+ to the PC with the
plied USB cable (in the rover transit c
of the
e
2.
sup e).
3.
4. In SurvCE, select File > Data Transfer. The Data
Transfer window opens (see Figure 105).
as
On the Explorer 600+, run SurvCE.
5. Accept the default COM Port setting, COM1.
Tap the Carlson/C&G Transfer button. The 6.
Explorer 600+ waits for a connection.
In X-Port, select Tools > Data Transfer >
SurvCE/ 7.
G2/FastSurvey/SurvStar. X-Port opens
the SurvCom window on the PC, and connects to
the Explorer 600+.
8. Select the Geoid button at the bottom
window. The Set Geoid Area window opens (se
Figure 106).